dmesg - AMD Radeon RX 5600 OEM

Return To AMD Radeon RX 5600 OEM System Information

Linux version 5.4.0-58-generic (buildd@lcy01-amd64-004) (gcc version 9.3.0 (Ubuntu 9.3.0-17ubuntu1~20.04)) #64-Ubuntu SMP Wed Dec 9 08:16:25 UTC 2020 (Ubuntu 5.4.0-58.64-generic 5.4.73)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Hygon HygonGenuine
  Centaur CentaurHauls
  zhaoxin   Shanghai  
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000009e01fff] usable
BIOS-e820: [mem 0x0000000009e02000-0x0000000009ffffff] reserved
BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
BIOS-e820: [mem 0x000000000a200000-0x000000000a20bfff] ACPI NVS
BIOS-e820: [mem 0x000000000a20c000-0x00000000db90cfff] usable
BIOS-e820: [mem 0x00000000db90d000-0x00000000dba79fff] reserved
BIOS-e820: [mem 0x00000000dba7a000-0x00000000dbefcfff] usable
BIOS-e820: [mem 0x00000000dbefd000-0x00000000dc016fff] ACPI NVS
BIOS-e820: [mem 0x00000000dc017000-0x00000000dccdcfff] reserved
BIOS-e820: [mem 0x00000000dccdd000-0x00000000deffffff] usable
BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fd000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041f37ffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0xd7f15018-0xd7f26057] usable ==> usable
e820: update [mem 0xd7f15018-0xd7f26057] usable ==> usable
e820: update [mem 0xd7eca018-0xd7ee3457] usable ==> usable
e820: update [mem 0xd7eca018-0xd7ee3457] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x0000000009e01fff] usable
reserve setup_data: [mem 0x0000000009e02000-0x0000000009ffffff] reserved
reserve setup_data: [mem 0x000000000a000000-0x000000000a1fffff] usable
reserve setup_data: [mem 0x000000000a200000-0x000000000a20bfff] ACPI NVS
reserve setup_data: [mem 0x000000000a20c000-0x00000000d7eca017] usable
reserve setup_data: [mem 0x00000000d7eca018-0x00000000d7ee3457] usable
reserve setup_data: [mem 0x00000000d7ee3458-0x00000000d7f15017] usable
reserve setup_data: [mem 0x00000000d7f15018-0x00000000d7f26057] usable
reserve setup_data: [mem 0x00000000d7f26058-0x00000000db90cfff] usable
reserve setup_data: [mem 0x00000000db90d000-0x00000000dba79fff] reserved
reserve setup_data: [mem 0x00000000dba7a000-0x00000000dbefcfff] usable
reserve setup_data: [mem 0x00000000dbefd000-0x00000000dc016fff] ACPI NVS
reserve setup_data: [mem 0x00000000dc017000-0x00000000dccdcfff] reserved
reserve setup_data: [mem 0x00000000dccdd000-0x00000000deffffff] usable
reserve setup_data: [mem 0x00000000df000000-0x00000000dfffffff] reserved
reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
reserve setup_data: [mem 0x00000000fd000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000041f37ffff] usable
efi: EFI v2.70 by American Megatrends
efi:  ACPI 2.0=0xdbf93000  ACPI=0xdbf93000  SMBIOS=0xdcb36000  SMBIOS 3.0=0xdcb35000  MEMATTR=0xda2b8018  ESRT=0xda059218 
secureboot: Secure boot disabled
SMBIOS 3.2.0 present.
DMI: Gigabyte Technology Co., Ltd. X570 AORUS ELITE/X570 AORUS ELITE, BIOS F11 12/06/2019
tsc: Fast TSC calibration failed
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x41f380 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF write-through
  C0000-DFFFF uncachable
  E0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000000 mask FFFF80000000 write-back
  1 base 000080000000 mask FFFFC0000000 write-back
  2 base 0000C0000000 mask FFFFE0000000 write-back
  3 base 0000DC420000 mask FFFFFFFF0000 uncachable
  4 disabled
  5 disabled
  6 disabled
  7 disabled
TOM2: 0000000420000000 aka 16896M
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
total RAM covered: 3583M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 64M 	num_reg: 4  	lose cover RAM: 0G
e820: update [mem 0xdc420000-0xdc42ffff] usable ==> reserved
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
last_pfn = 0xdf000 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x00000000da059218 to 0x00000000da059250.
e820: update [mem 0xda059000-0xda059fff] usable ==> reserved
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
secureboot: Secure boot disabled
RAMDISK: [mem 0x3a4da000-0x3d48ffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000DBF93000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DBF930A0 0000BC (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x00000000DBF99FC0 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
ACPI: DSDT 0x00000000DBF931F0 006DCB (v02 ALASKA A M I    01072009 INTL 20160930)
ACPI: FACS 0x00000000DBFFFE00 000040
ACPI: APIC 0x00000000DBF9A0D8 00015E (v03 ALASKA A M I    01072009 AMI  00010013)
ACPI: FPDT 0x00000000DBF9A238 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FIDT 0x00000000DBF9A280 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: SSDT 0x00000000DBF9A320 0000C8 (v02 ALASKA A M I    01072009 AMI  01072009)
ACPI: SSDT 0x00000000DBF9A3E8 008C98 (v02 ALASKA A M I    00000002 MSFT 04000000)
ACPI: SSDT 0x00000000DBFA3080 00374D (v01 ALASKA A M I    00000001 INTL 20160930)
ACPI: MCFG 0x00000000DBFA67D0 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
ACPI: SSDT 0x00000000DBFA6810 0093AD (v01 ALASKA A M I    00000001 INTL 20160930)
ACPI: HPET 0x00000000DBFAFBC0 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
ACPI: SSDT 0x00000000DBFAFBF8 000024 (v01 ALASKA A M I    00001000 INTL 20160930)
ACPI: UEFI 0x00000000DBFAFC20 000042 (v01 ALASKA A M I    00000002      01000013)
ACPI: VFCT 0x00000000DBFAFC68 00E884 (v01 ALASKA A M I    00000001 AMD  31504F47)
ACPI: PCCT 0x00000000DBFBE4F0 00006E (v01 ALASKA A M I    00000001 AMD  00000000)
ACPI: SSDT 0x00000000DBFBE560 002F29 (v01 ALASKA A M I    00000001 AMD  00000001)
ACPI: CRAT 0x00000000DBFC1490 000B58 (v01 ALASKA A M I    00000001 AMD  00000001)
ACPI: CDIT 0x00000000DBFC1FE8 000029 (v01 ALASKA A M I    00000001 AMD  00000001)
ACPI: SSDT 0x00000000DBFC2018 001EC3 (v01 ALASKA A M I    00000001 INTL 20160930)
ACPI: WSMT 0x00000000DBFC3EE0 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041f37ffff]
NODE_DATA(0) allocated [mem 0x41f355000-0x41f37ffff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000041f37ffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009ffff]
  node   0: [mem 0x0000000000100000-0x0000000009e01fff]
  node   0: [mem 0x000000000a000000-0x000000000a1fffff]
  node   0: [mem 0x000000000a20c000-0x00000000db90cfff]
  node   0: [mem 0x00000000dba7a000-0x00000000dbefcfff]
  node   0: [mem 0x00000000dccdd000-0x00000000deffffff]
  node   0: [mem 0x0000000100000000-0x000000041f37ffff]
Zeroed struct page in unavailable ranges: 11832 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000041f37ffff]
On node 0 totalpages: 4182472
  DMA zone: 64 pages used for memmap
  DMA zone: 26 pages reserved
  DMA zone: 3999 pages, LIFO batch:0
  DMA32 zone: 14139 pages used for memmap
  DMA32 zone: 904873 pages, LIFO batch:63
  Normal zone: 51150 pages used for memmap
  Normal zone: 3273600 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 13, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 14, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
smpboot: Allowing 32 CPUs, 20 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x09e02000-0x09ffffff]
PM: Registered nosave memory: [mem 0x0a200000-0x0a20bfff]
PM: Registered nosave memory: [mem 0xd7eca000-0xd7ecafff]
PM: Registered nosave memory: [mem 0xd7ee3000-0xd7ee3fff]
PM: Registered nosave memory: [mem 0xd7f15000-0xd7f15fff]
PM: Registered nosave memory: [mem 0xd7f26000-0xd7f26fff]
PM: Registered nosave memory: [mem 0xda059000-0xda059fff]
PM: Registered nosave memory: [mem 0xdb90d000-0xdba79fff]
PM: Registered nosave memory: [mem 0xdbefd000-0xdc016fff]
PM: Registered nosave memory: [mem 0xdc017000-0xdccdcfff]
PM: Registered nosave memory: [mem 0xdf000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfcffffff]
PM: Registered nosave memory: [mem 0xfd000000-0xffffffff]
[mem 0xe0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31 
Built 1 zonelists, mobility grouping on.  Total pages: 4117093
Policy zone: Normal
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16193080K/16729888K available (14339K kernel code, 2426K rwdata, 4932K rodata, 2720K init, 4956K bss, 536808K reserved, 0K cma-reserved)
random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
ftrace: allocating 44541 entries in 174 pages
rcu: Hierarchical RCU implementation.
rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=32.
	Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
NR_IRQS: 524544, nr_irqs: 1224, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20190816
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
APIC: Switch to symmetric I/O mode setup
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 3792.973 MHz processor
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6d58d6644d7, max_idle_ns: 881591195113 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 7585.94 BogoMIPS (lpj=15171892)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
*** VALIDATE tmpfs ***
*** VALIDATE proc ***
*** VALIDATE cgroup1 ***
*** VALIDATE cgroup2 ***
x86/cpu: User Mode Instruction Prevention (UMIP) activated
LVT offset 1 assigned for vector 0xf9
LVT offset 2 assigned for vector 0xf4
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full AMD retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 40K
smpboot: CPU0: AMD Ryzen 5 3600X 6-Core Processor (family: 0x17, model: 0x71, stepping: 0x0)
Performance Events: Fam17h+ core perfctr, AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      6
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000003f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7  #8  #9 #10 #11
smp: Brought up 1 node, 12 CPUs
smpboot: Max logical packages: 3
smpboot: Total of 12 processors activated (91031.35 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20bfff] (49152 bytes)
PM: Registering ACPI NVS region [mem 0xdbefd000-0xdc016fff] (1155072 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 14:19:17, date: 2020-12-28
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1609165157.164:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
Detected 1 PCC Subspaces
Registering PCC driver as Mailbox controller
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 8 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 2 GPEs in block 00 to 1F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec02fff window]
pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1480] type 00 class 0x060000
pci 0000:00:01.0: [1022:1482] type 00 class 0x060000
pci 0000:00:01.1: [1022:1483] type 01 class 0x060400
pci 0000:00:01.1: enabling Extended Tags
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.2: [1022:1483] type 01 class 0x060400
pci 0000:00:01.2: enabling Extended Tags
pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [1022:1482] type 00 class 0x060000
pci 0000:00:03.0: [1022:1482] type 00 class 0x060000
pci 0000:00:03.1: [1022:1483] type 01 class 0x060400
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [1022:1482] type 00 class 0x060000
pci 0000:00:05.0: [1022:1482] type 00 class 0x060000
pci 0000:00:07.0: [1022:1482] type 00 class 0x060000
pci 0000:00:07.1: [1022:1484] type 01 class 0x060400
pci 0000:00:07.1: enabling Extended Tags
pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1022:1482] type 00 class 0x060000
pci 0000:00:08.1: [1022:1484] type 01 class 0x060400
pci 0000:00:08.1: enabling Extended Tags
pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.2: [1022:1484] type 01 class 0x060400
pci 0000:00:08.2: enabling Extended Tags
pci 0000:00:08.2: PME# supported from D0 D3hot D3cold
pci 0000:00:08.3: [1022:1484] type 01 class 0x060400
pci 0000:00:08.3: enabling Extended Tags
pci 0000:00:08.3: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
pci 0000:00:18.0: [1022:1440] type 00 class 0x060000
pci 0000:00:18.1: [1022:1441] type 00 class 0x060000
pci 0000:00:18.2: [1022:1442] type 00 class 0x060000
pci 0000:00:18.3: [1022:1443] type 00 class 0x060000
pci 0000:00:18.4: [1022:1444] type 00 class 0x060000
pci 0000:00:18.5: [1022:1445] type 00 class 0x060000
pci 0000:00:18.6: [1022:1446] type 00 class 0x060000
pci 0000:00:18.7: [1022:1447] type 00 class 0x060000
pci 0000:01:00.0: [144d:a808] type 00 class 0x010802
pci 0000:01:00.0: reg 0x10: [mem 0xfcf00000-0xfcf03fff 64bit]
pci 0000:00:01.1: PCI bridge to [bus 01]
pci 0000:00:01.1:   bridge window [mem 0xfcf00000-0xfcffffff]
pci 0000:02:00.0: [1022:57ad] type 01 class 0x060400
pci 0000:02:00.0: enabling Extended Tags
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16 GT/s x4 link at 0000:00:01.2 (capable of 126.024 Gb/s with 16 GT/s x8 link)
pci 0000:00:01.2: PCI bridge to [bus 02-08]
pci 0000:00:01.2:   bridge window [io  0xf000-0xffff]
pci 0000:00:01.2:   bridge window [mem 0xfc200000-0xfc7fffff]
pci 0000:03:01.0: [1022:57a3] type 01 class 0x060400
pci 0000:03:01.0: enabling Extended Tags
pci 0000:03:01.0: PME# supported from D0 D3hot D3cold
pci 0000:03:04.0: [1022:57a3] type 01 class 0x060400
pci 0000:03:04.0: enabling Extended Tags
pci 0000:03:04.0: PME# supported from D0 D3hot D3cold
pci 0000:03:08.0: [1022:57a4] type 01 class 0x060400
pci 0000:03:08.0: enabling Extended Tags
pci 0000:03:08.0: PME# supported from D0 D3hot D3cold
pci 0000:03:09.0: [1022:57a4] type 01 class 0x060400
pci 0000:03:09.0: enabling Extended Tags
pci 0000:03:09.0: PME# supported from D0 D3hot D3cold
pci 0000:03:0a.0: [1022:57a4] type 01 class 0x060400
pci 0000:03:0a.0: enabling Extended Tags
pci 0000:03:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PCI bridge to [bus 03-08]
pci 0000:02:00.0:   bridge window [io  0xf000-0xffff]
pci 0000:02:00.0:   bridge window [mem 0xfc200000-0xfc7fffff]
pci 0000:04:00.0: [144d:a808] type 00 class 0x010802
pci 0000:04:00.0: reg 0x10: [mem 0xfc700000-0xfc703fff 64bit]
pci 0000:03:01.0: PCI bridge to [bus 04]
pci 0000:03:01.0:   bridge window [mem 0xfc700000-0xfc7fffff]
pci 0000:05:00.0: [8086:1539] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [mem 0xfc600000-0xfc61ffff]
pci 0000:05:00.0: reg 0x18: [io  0xf000-0xf01f]
pci 0000:05:00.0: reg 0x1c: [mem 0xfc620000-0xfc623fff]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:04.0: PCI bridge to [bus 05]
pci 0000:03:04.0:   bridge window [io  0xf000-0xffff]
pci 0000:03:04.0:   bridge window [mem 0xfc600000-0xfc6fffff]
pci 0000:06:00.0: [1022:1485] type 00 class 0x130000
pci 0000:06:00.0: enabling Extended Tags
pci 0000:06:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16 GT/s x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16 GT/s x16 link)
pci 0000:06:00.1: [1022:149c] type 00 class 0x0c0330
pci 0000:06:00.1: reg 0x10: [mem 0xfc300000-0xfc3fffff 64bit]
pci 0000:06:00.1: enabling Extended Tags
pci 0000:06:00.1: PME# supported from D0 D3hot D3cold
pci 0000:06:00.3: [1022:149c] type 00 class 0x0c0330
pci 0000:06:00.3: reg 0x10: [mem 0xfc200000-0xfc2fffff 64bit]
pci 0000:06:00.3: enabling Extended Tags
pci 0000:06:00.3: PME# supported from D0 D3hot D3cold
pci 0000:03:08.0: PCI bridge to [bus 06]
pci 0000:03:08.0:   bridge window [mem 0xfc200000-0xfc3fffff]
pci 0000:07:00.0: [1022:7901] type 00 class 0x010601
pci 0000:07:00.0: reg 0x24: [mem 0xfc500000-0xfc5007ff]
pci 0000:07:00.0: enabling Extended Tags
pci 0000:07:00.0: PME# supported from D3hot D3cold
pci 0000:07:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16 GT/s x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16 GT/s x16 link)
pci 0000:03:09.0: PCI bridge to [bus 07]
pci 0000:03:09.0:   bridge window [mem 0xfc500000-0xfc5fffff]
pci 0000:08:00.0: [1022:7901] type 00 class 0x010601
pci 0000:08:00.0: reg 0x24: [mem 0xfc400000-0xfc4007ff]
pci 0000:08:00.0: enabling Extended Tags
pci 0000:08:00.0: PME# supported from D3hot D3cold
pci 0000:08:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16 GT/s x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16 GT/s x16 link)
pci 0000:03:0a.0: PCI bridge to [bus 08]
pci 0000:03:0a.0:   bridge window [mem 0xfc400000-0xfc4fffff]
pci 0000:09:00.0: [1002:1478] type 01 class 0x060400
pci 0000:09:00.0: reg 0x10: [mem 0xfcc00000-0xfcc03fff]
pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.1: PCI bridge to [bus 09-0b]
pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
pci 0000:00:03.1:   bridge window [mem 0xfcb00000-0xfccfffff]
pci 0000:00:03.1:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:0a:00.0: [1002:1479] type 01 class 0x060400
pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold
pci 0000:09:00.0: PCI bridge to [bus 0a-0b]
pci 0000:09:00.0:   bridge window [io  0xe000-0xefff]
pci 0000:09:00.0:   bridge window [mem 0xfcb00000-0xfcbfffff]
pci 0000:09:00.0:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:0b:00.0: [1002:731f] type 00 class 0x030000
pci 0000:0b:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:0b:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:0b:00.0: reg 0x20: [io  0xe000-0xe0ff]
pci 0000:0b:00.0: reg 0x24: [mem 0xfcb00000-0xfcb7ffff]
pci 0000:0b:00.0: reg 0x30: [mem 0xfcb80000-0xfcb9ffff pref]
pci 0000:0b:00.0: BAR 0: assigned to efifb
pci 0000:0b:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:0b:00.1: [1002:ab38] type 00 class 0x040300
pci 0000:0b:00.1: reg 0x10: [mem 0xfcba0000-0xfcba3fff]
pci 0000:0b:00.1: PME# supported from D1 D2 D3hot D3cold
pci 0000:0a:00.0: PCI bridge to [bus 0b]
pci 0000:0a:00.0:   bridge window [io  0xe000-0xefff]
pci 0000:0a:00.0:   bridge window [mem 0xfcb00000-0xfcbfffff]
pci 0000:0a:00.0:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:0c:00.0: [1022:148a] type 00 class 0x130000
pci 0000:0c:00.0: enabling Extended Tags
pci 0000:00:07.1: PCI bridge to [bus 0c]
pci 0000:0d:00.0: [1022:1485] type 00 class 0x130000
pci 0000:0d:00.0: enabling Extended Tags
pci 0000:0d:00.1: [1022:1486] type 00 class 0x108000
pci 0000:0d:00.1: reg 0x18: [mem 0xfc900000-0xfc9fffff]
pci 0000:0d:00.1: reg 0x24: [mem 0xfca08000-0xfca09fff]
pci 0000:0d:00.1: enabling Extended Tags
pci 0000:0d:00.3: [1022:149c] type 00 class 0x0c0330
pci 0000:0d:00.3: reg 0x10: [mem 0xfc800000-0xfc8fffff 64bit]
pci 0000:0d:00.3: enabling Extended Tags
pci 0000:0d:00.3: PME# supported from D0 D3hot D3cold
pci 0000:0d:00.4: [1022:1487] type 00 class 0x040300
pci 0000:0d:00.4: reg 0x10: [mem 0xfca00000-0xfca07fff]
pci 0000:0d:00.4: enabling Extended Tags
pci 0000:0d:00.4: PME# supported from D0 D3hot D3cold
pci 0000:00:08.1: PCI bridge to [bus 0d]
pci 0000:00:08.1:   bridge window [mem 0xfc800000-0xfcafffff]
pci 0000:0e:00.0: [1022:7901] type 00 class 0x010601
pci 0000:0e:00.0: reg 0x24: [mem 0xfce00000-0xfce007ff]
pci 0000:0e:00.0: enabling Extended Tags
pci 0000:0e:00.0: PME# supported from D3hot D3cold
pci 0000:00:08.2: PCI bridge to [bus 0e]
pci 0000:00:08.2:   bridge window [mem 0xfce00000-0xfcefffff]
pci 0000:0f:00.0: [1022:7901] type 00 class 0x010601
pci 0000:0f:00.0: reg 0x24: [mem 0xfcd00000-0xfcd007ff]
pci 0000:0f:00.0: enabling Extended Tags
pci 0000:0f:00.0: PME# supported from D3hot D3cold
pci 0000:00:08.3: PCI bridge to [bus 0f]
pci 0000:00:08.3:   bridge window [mem 0xfcd00000-0xfcdfffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
iommu: Default domain type: Translated 
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:0b:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pci 0000:0b:00.0: vgaarb: bridge control possible
pci 0000:0b:00.0: vgaarb: setting as boot device
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
Expanded resource Reserved due to conflict with PCI Bus 0000:00
e820: reserve RAM buffer [mem 0x09e02000-0x0bffffff]
e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
e820: reserve RAM buffer [mem 0xd7eca018-0xd7ffffff]
e820: reserve RAM buffer [mem 0xd7f15018-0xd7ffffff]
e820: reserve RAM buffer [mem 0xda059000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdb90d000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdbefd000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x41f380000-0x41fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
*** VALIDATE bpf ***
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
*** VALIDATE ramfs ***
*** VALIDATE hugetlbfs ***
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xfeb80000-0xfebfffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [mem 0xfd000000-0xfd0fffff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:04: [io  0x0a00-0x0a2f] has been reserved
system 00:04: [io  0x0a30-0x0a3f] has been reserved
system 00:04: [io  0x0a40-0x0a4f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io  0x04d0-0x04d1] has been reserved
system 00:05: [io  0x040b] has been reserved
system 00:05: [io  0x04d6] has been reserved
system 00:05: [io  0x0c00-0x0c01] has been reserved
system 00:05: [io  0x0c14] has been reserved
system 00:05: [io  0x0c50-0x0c51] has been reserved
system 00:05: [io  0x0c52] has been reserved
system 00:05: [io  0x0c6c] has been reserved
system 00:05: [io  0x0c6f] has been reserved
system 00:05: [io  0x0cd0-0x0cd1] has been reserved
system 00:05: [io  0x0cd2-0x0cd3] has been reserved
system 00:05: [io  0x0cd4-0x0cd5] has been reserved
system 00:05: [io  0x0cd6-0x0cd7] has been reserved
system 00:05: [io  0x0cd8-0x0cdf] has been reserved
system 00:05: [io  0x0800-0x089f] has been reserved
system 00:05: [io  0x0b00-0x0b0f] has been reserved
system 00:05: [io  0x0b20-0x0b3f] has been reserved
system 00:05: [io  0x0900-0x090f] has been reserved
system 00:05: [io  0x0910-0x091f] has been reserved
system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:05: [mem 0xfec01000-0xfec01fff] could not be reserved
system 00:05: [mem 0xfedc0000-0xfedc0fff] has been reserved
system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:05: [mem 0xfed80000-0xfed8ffff] could not be reserved
system 00:05: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 6 devices
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.1: PCI bridge to [bus 01]
pci 0000:00:01.1:   bridge window [mem 0xfcf00000-0xfcffffff]
pci 0000:03:01.0: PCI bridge to [bus 04]
pci 0000:03:01.0:   bridge window [mem 0xfc700000-0xfc7fffff]
pci 0000:03:04.0: PCI bridge to [bus 05]
pci 0000:03:04.0:   bridge window [io  0xf000-0xffff]
pci 0000:03:04.0:   bridge window [mem 0xfc600000-0xfc6fffff]
pci 0000:03:08.0: PCI bridge to [bus 06]
pci 0000:03:08.0:   bridge window [mem 0xfc200000-0xfc3fffff]
pci 0000:03:09.0: PCI bridge to [bus 07]
pci 0000:03:09.0:   bridge window [mem 0xfc500000-0xfc5fffff]
pci 0000:03:0a.0: PCI bridge to [bus 08]
pci 0000:03:0a.0:   bridge window [mem 0xfc400000-0xfc4fffff]
pci 0000:02:00.0: PCI bridge to [bus 03-08]
pci 0000:02:00.0:   bridge window [io  0xf000-0xffff]
pci 0000:02:00.0:   bridge window [mem 0xfc200000-0xfc7fffff]
pci 0000:00:01.2: PCI bridge to [bus 02-08]
pci 0000:00:01.2:   bridge window [io  0xf000-0xffff]
pci 0000:00:01.2:   bridge window [mem 0xfc200000-0xfc7fffff]
pci 0000:0a:00.0: PCI bridge to [bus 0b]
pci 0000:0a:00.0:   bridge window [io  0xe000-0xefff]
pci 0000:0a:00.0:   bridge window [mem 0xfcb00000-0xfcbfffff]
pci 0000:0a:00.0:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:09:00.0: PCI bridge to [bus 0a-0b]
pci 0000:09:00.0:   bridge window [io  0xe000-0xefff]
pci 0000:09:00.0:   bridge window [mem 0xfcb00000-0xfcbfffff]
pci 0000:09:00.0:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:00:03.1: PCI bridge to [bus 09-0b]
pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
pci 0000:00:03.1:   bridge window [mem 0xfcb00000-0xfccfffff]
pci 0000:00:03.1:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:00:07.1: PCI bridge to [bus 0c]
pci 0000:00:08.1: PCI bridge to [bus 0d]
pci 0000:00:08.1:   bridge window [mem 0xfc800000-0xfcafffff]
pci 0000:00:08.2: PCI bridge to [bus 0e]
pci 0000:00:08.2:   bridge window [mem 0xfce00000-0xfcefffff]
pci 0000:00:08.3: PCI bridge to [bus 0f]
pci 0000:00:08.3:   bridge window [mem 0xfcd00000-0xfcdfffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec02fff window]
pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
pci_bus 0000:01: resource 1 [mem 0xfcf00000-0xfcffffff]
pci_bus 0000:02: resource 0 [io  0xf000-0xffff]
pci_bus 0000:02: resource 1 [mem 0xfc200000-0xfc7fffff]
pci_bus 0000:03: resource 0 [io  0xf000-0xffff]
pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc7fffff]
pci_bus 0000:04: resource 1 [mem 0xfc700000-0xfc7fffff]
pci_bus 0000:05: resource 0 [io  0xf000-0xffff]
pci_bus 0000:05: resource 1 [mem 0xfc600000-0xfc6fffff]
pci_bus 0000:06: resource 1 [mem 0xfc200000-0xfc3fffff]
pci_bus 0000:07: resource 1 [mem 0xfc500000-0xfc5fffff]
pci_bus 0000:08: resource 1 [mem 0xfc400000-0xfc4fffff]
pci_bus 0000:09: resource 0 [io  0xe000-0xefff]
pci_bus 0000:09: resource 1 [mem 0xfcb00000-0xfccfffff]
pci_bus 0000:09: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
pci_bus 0000:0a: resource 0 [io  0xe000-0xefff]
pci_bus 0000:0a: resource 1 [mem 0xfcb00000-0xfcbfffff]
pci_bus 0000:0a: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
pci_bus 0000:0b: resource 0 [io  0xe000-0xefff]
pci_bus 0000:0b: resource 1 [mem 0xfcb00000-0xfcbfffff]
pci_bus 0000:0b: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
pci_bus 0000:0d: resource 1 [mem 0xfc800000-0xfcafffff]
pci_bus 0000:0e: resource 1 [mem 0xfce00000-0xfcefffff]
pci_bus 0000:0f: resource 1 [mem 0xfcd00000-0xfcdfffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:0b:00.1: D0 power state depends on 0000:0b:00.0
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 48856K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0xd3eca000-0xd7eca000] (64MB)
amd_uncore: AMD NB counters detected
amd_uncore: AMD LLC counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000003ff)
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
*** VALIDATE fuse ***
*** VALIDATE fuse ***
Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
pcieport 0000:00:01.1: PME: Signaling with IRQ 26
pcieport 0000:00:01.2: PME: Signaling with IRQ 27
pcieport 0000:00:03.1: PME: Signaling with IRQ 28
pcieport 0000:00:07.1: PME: Signaling with IRQ 30
pcieport 0000:00:07.1: AER: enabled with IRQ 30
pcieport 0000:00:08.1: PME: Signaling with IRQ 31
pcieport 0000:00:08.1: AER: enabled with IRQ 31
pcieport 0000:00:08.2: PME: Signaling with IRQ 32
pcieport 0000:00:08.2: AER: enabled with IRQ 32
pcieport 0000:00:08.3: PME: Signaling with IRQ 33
pcieport 0000:00:08.3: AER: enabled with IRQ 33
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: No BGRT, not showing boot graphics
efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
fbcon: Deferring console take-over
fb0: EFI VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
tsc: Refined TSC clocksource calibration: 3792.873 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6d5818a734c, max_idle_ns: 881590694765 ns
clocksource: Switched to clocksource tsc
ACPI: Invalid passive threshold
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ10] (17 C)
ACPI: Invalid passive threshold
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [PCT0] (17 C)
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:06:00.1: xHCI Host Controller
xhci_hcd 0000:06:00.1: new USB bus registered, assigned bus number 1
xhci_hcd 0000:06:00.1: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.4.0-58-generic xhci-hcd
usb usb1: SerialNumber: 0000:06:00.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
xhci_hcd 0000:06:00.1: xHCI Host Controller
xhci_hcd 0000:06:00.1: new USB bus registered, assigned bus number 2
xhci_hcd 0000:06:00.1: Host supports USB 3.1 Enhanced SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.4.0-58-generic xhci-hcd
usb usb2: SerialNumber: 0000:06:00.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
xhci_hcd 0000:06:00.3: xHCI Host Controller
xhci_hcd 0000:06:00.3: new USB bus registered, assigned bus number 3
xhci_hcd 0000:06:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.4.0-58-generic xhci-hcd
usb usb3: SerialNumber: 0000:06:00.3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
xhci_hcd 0000:06:00.3: xHCI Host Controller
xhci_hcd 0000:06:00.3: new USB bus registered, assigned bus number 4
xhci_hcd 0000:06:00.3: Host supports USB 3.1 Enhanced SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 5.4.0-58-generic xhci-hcd
usb usb4: SerialNumber: 0000:06:00.3
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
usb: port power management may be unreliable
xhci_hcd 0000:0d:00.3: xHCI Host Controller
xhci_hcd 0000:0d:00.3: new USB bus registered, assigned bus number 5
xhci_hcd 0000:0d:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 5.4.0-58-generic xhci-hcd
usb usb5: SerialNumber: 0000:0d:00.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 4 ports detected
xhci_hcd 0000:0d:00.3: xHCI Host Controller
xhci_hcd 0000:0d:00.3: new USB bus registered, assigned bus number 6
xhci_hcd 0000:0d:00.3: Host supports USB 3.1 Enhanced SuperSpeed
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 5.4.0-58-generic xhci-hcd
usb usb6: SerialNumber: 0000:0d:00.3
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: registered as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
drop_monitor: Initializing network drop monitor service
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: CPU0: patch_level=0x08701013
microcode: CPU1: patch_level=0x08701013
microcode: CPU2: patch_level=0x08701013
microcode: CPU3: patch_level=0x08701013
microcode: CPU4: patch_level=0x08701013
microcode: CPU5: patch_level=0x08701013
microcode: CPU6: patch_level=0x08701013
microcode: CPU7: patch_level=0x08701013
microcode: CPU8: patch_level=0x08701013
microcode: CPU9: patch_level=0x08701013
microcode: CPU10: patch_level=0x08701013
microcode: CPU11: patch_level=0x08701013
microcode: Microcode Update Driver: v2.2.
*** VALIDATE rdt ***
resctrl: L3 allocation detected
resctrl: L3DATA allocation detected
resctrl: L3CODE allocation detected
resctrl: MB allocation detected
resctrl: L3 monitoring detected
IPI shorthand broadcast: enabled
sched_clock: Marking stable (2354967705, -23996964)->(2334963029, -3992288)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 6b3d3d266049f4a4077ed3557f79f9ce7832433a'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type big_key registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
integrity: Loading X.509 certificate: UEFI:MokListRT
integrity: Loaded X.509 cert 'SomeOrg: shim: a01ee84e9b37ace407961cc468c5909447878469'
integrity: Loading X.509 certificate: UEFI:MokListRT
integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM:   Magic number: 0:897:334
tty tty55: hash matches
rtc_cmos 00:03: setting system clock to 2020-12-28T14:19:19 UTC (1609165159)
acpi_cpufreq: overriding BIOS provided _PSD data
Freeing unused decrypted memory: 2040K
Freeing unused kernel image memory: 2720K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 1212K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
dca service started, version 1.12.1
nvme nvme0: pci function 0000:01:00.0
nvme nvme1: pci function 0000:04:00.0
ahci 0000:07:00.0: version 3.0
ahci 0000:07:00.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0xc impl SATA mode
ahci 0000:07:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part sxs 
scsi host0: ahci
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
scsi host1: ahci
ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\GSA1.SMBI) (20190816/utaddress-204)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
scsi host2: ahci
scsi host3: ahci
ata1: DUMMY
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xfc500000 port 0xfc500200 irq 65
ata4: SATA max UDMA/133 abar m2048@0xfc500000 port 0xfc500280 irq 65
ahci 0000:08:00.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0x33 impl SATA mode
ahci 0000:08:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part sxs 
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
scsi host8: ahci
scsi host9: ahci
ata5: SATA max UDMA/133 abar m2048@0xfc400000 port 0xfc400100 irq 71
ata6: SATA max UDMA/133 abar m2048@0xfc400000 port 0xfc400180 irq 71
ata7: DUMMY
ata8: DUMMY
ata9: SATA max UDMA/133 abar m2048@0xfc400000 port 0xfc400300 irq 71
ata10: SATA max UDMA/133 abar m2048@0xfc400000 port 0xfc400380 irq 71
ahci 0000:0e:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:0e:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part 
scsi host10: ahci
ata11: SATA max UDMA/133 abar m2048@0xfce00000 port 0xfce00100 irq 73
ahci 0000:0f:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:0f:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part 
scsi host11: ahci
ata12: SATA max UDMA/133 abar m2048@0xfcd00000 port 0xfcd00100 irq 75
pps pps0: new PPS source ptp0
igb 0000:05:00.0: added PHC on eth0
igb 0000:05:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:05:00.0: eth0: (PCIe:2.5Gb/s:Width x1) b4:2e:99:a3:6c:1f
igb 0000:05:00.0: eth0: PBA No: FFFFFF-0FF
igb 0000:05:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
igb 0000:05:00.0 enp5s0: renamed from eth0
nvme nvme1: missing or invalid SUBNQN field.
nvme nvme0: missing or invalid SUBNQN field.
nvme nvme1: Shutdown timeout set to 8 seconds
nvme nvme0: Shutdown timeout set to 8 seconds
nvme nvme1: 32/0/0 default/read/poll queues
nvme nvme0: 32/0/0 default/read/poll queues
usb 1-3: new high-speed USB device number 2 using xhci_hcd
usb 3-4: new full-speed USB device number 2 using xhci_hcd
usb 5-2: new high-speed USB device number 2 using xhci_hcd
 nvme0n1: p1 p2 p3 p4 p5
 nvme1n1: p1 p2
ata12: SATA link down (SStatus 0 SControl 300)
ata11: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
usb 1-3: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-3: Product: USB2.0 Hub
usb 5-2: New USB device found, idVendor=2833, idProduct=2052, bcdDevice= 1.08
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: Rift S USB Hub
usb 5-2: Manufacturer: Oculus VR
usb 5-2: SerialNumber: 1WMGH5200R9314
usb 3-4: New USB device found, idVendor=046d, idProduct=c216, bcdDevice= 4.14
usb 3-4: New USB device strings: Mfr=1, Product=9, SerialNumber=3
usb 3-4: Product: Logitech Dual Action
usb 3-4: Manufacturer: Logitech
usb 3-4: SerialNumber: A6FA5445
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 4 ports detected
hub 5-2:1.0: USB hub found
hub 5-2:1.0: 2 ports detected
usb 6-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
usb 6-2: New USB device found, idVendor=2833, idProduct=2051, bcdDevice= 1.08
usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 6-2: Product: Rift S USB Hub
usb 6-2: Manufacturer: Oculus VR
usb 6-2: SerialNumber: 1WMGH5200R9314
usb 3-6: new high-speed USB device number 3 using xhci_hcd
hub 6-2:1.0: USB hub found
hub 6-2:1.0: 1 port detected
usb 1-4: new full-speed USB device number 3 using xhci_hcd
usb 3-6: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
usb 3-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-6: Product: USB2.0 Hub
usb 1-4: New USB device found, idVendor=048d, idProduct=8297, bcdDevice= 0.03
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4: Product: ITE Device(8595)
usb 1-4: Manufacturer: ITE Tech. Inc.
hub 3-6:1.0: USB hub found
hub 3-6:1.0: 4 ports detected
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
hid-generic 0003:048D:8297.0002: hiddev0,hidraw0: USB HID v1.10 Device [ITE Tech. Inc. ITE Device(8595)] on usb-0000:06:00.1-4/input0
input: Logitech Logitech Dual Action as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:06:00.3/usb3/3-4/3-4:1.0/0003:046D:C216.0001/input/input2
logitech 0003:046D:C216.0001: input,hidraw1: USB HID v1.11 Joystick [Logitech Logitech Dual Action] on usb-0000:06:00.3-4/input0
usb 5-2.2: new full-speed USB device number 3 using xhci_hcd
usb 1-3.1: new full-speed USB device number 4 using xhci_hcd
usb 5-2.2: New USB device found, idVendor=2833, idProduct=0051, bcdDevice= 1.08
usb 5-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2.2: Product: Rift S
usb 5-2.2: Manufacturer: Oculus VR
usb 5-2.2: SerialNumber: 1WMGH5200R9314
usb 1-3.1: New USB device found, idVendor=046d, idProduct=c219, bcdDevice= 3.05
usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3.1: Product: Logitech Cordless RumblePad 2
usb 1-3.1: Manufacturer: Logitech
input: Logitech Logitech Cordless RumblePad 2 as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:06:00.1/usb1/1-3/1-3.1/1-3.1:1.0/0003:046D:C219.0003/input/input3
logitech 0003:046D:C219.0003: input,hidraw2: USB HID v1.11 Gamepad [Logitech Logitech Cordless RumblePad 2] on usb-0000:06:00.1-3.1/input0
hid_logitech: Force feedback for Logitech force feedback devices by Johann Deneux 
hid-generic 0003:2833:0051.0004: hiddev1,hidraw3: USB HID v1.11 Device [Oculus VR Rift S] on usb-0000:0d:00.3-2.2/input6
usb 1-3.2: new low-speed USB device number 5 using xhci_hcd
hid-generic 0003:2833:0051.0005: hiddev2,hidraw4: USB HID v1.11 Device [Oculus VR Rift S] on usb-0000:0d:00.3-2.2/input7
hid-generic 0003:2833:0051.0006: hiddev3,hidraw5: USB HID v1.11 Device [Oculus VR Rift S] on usb-0000:0d:00.3-2.2/input8
usb 1-3.2: New USB device found, idVendor=046d, idProduct=c215, bcdDevice= 2.04
usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3.2: Product: Logitech Extreme 3D
usb 1-3.2: Manufacturer: Logitech
input: Logitech Logitech Extreme 3D as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:06:00.1/usb1/1-3/1-3.2/1-3.2:1.0/0003:046D:C215.0007/input/input4
logitech 0003:046D:C215.0007: input,hidraw6: USB HID v1.10 Joystick [Logitech Logitech Extreme 3D] on usb-0000:06:00.1-3.2/input0
usb 1-3.4: new high-speed USB device number 6 using xhci_hcd
usb 1-3.4: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
usb 1-3.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-3.4: Product: USB 2.0 Hub
hub 1-3.4:1.0: USB hub found
hub 1-3.4:1.0: 4 ports detected
fbcon: Taking over console
Console: switching to colour frame buffer device 128x48
EXT4-fs (nvme0n1p5): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 245.4-4ubuntu3.3 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: Finished Uncomplicated firewall.
systemd[1]: modprobe@drm.service: Succeeded.
EXT4-fs (nvme0n1p5): re-mounted. Opts: errors=remount-ro
systemd[1]: Finished Load Kernel Module drm.
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Activating swap /swapfile...
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
lp: driver loaded but no devices found
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create System Users...
ppdev: user-space parallel port driver
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Mounted Kernel Configuration File System.
systemd[1]: Finished Create System Users.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Load/Save Random Seed.
systemd[1]: Finished Apply Kernel Variables.
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Finished Set the console keyboard layout.
systemd[1]: Reached target Local File Systems (Pre).
systemd[1]: Mounting Mount unit for core18, revision 1944...
systemd[1]: Mounting Mount unit for ksuperkey, revision 1...
systemd[1]: Mounting Mount unit for snapd, revision 10492...
systemd[1]: Finished udev Coldplug all Devices.
systemd[1]: Started Journal Service.
systemd-journald[364]: Received client request to flush runtime journal.
Adding 2097148k swap on /swapfile.  Priority:-2 extents:6 across:2260988k SSFS
usb 1-3.4.1: new high-speed USB device number 7 using xhci_hcd
ccp 0000:0d:00.1: enabling device (0000 -> 0002)
ccp 0000:0d:00.1: ccp enabled
cryptd: max_cpu_qlen set to 1000
cdc_acm 5-2.2:1.0: ttyACM0: USB ACM device
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
amdkcl: loading out-of-tree module taints kernel.
amdkcl: module verification failed: signature and/or required key missing - tainting kernel
mc: Linux media interface: v0.10
AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel 
AMD-Vi: AMD IOMMUv2 functionality not available on this system
snd_hda_intel 0000:0b:00.1: enabling device (0000 -> 0002)
snd_hda_intel 0000:0b:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:0d:00.4: enabling device (0000 -> 0002)
kvm: disabled by bios
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input5
input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input6
input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input7
input: HD-Audio Generic HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input8
input: HD-Audio Generic HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input9
input: HD-Audio Generic HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input10
snd_hda_codec_realtek hdaudioC1D0: ALCS1200A: SKU not ready 0x00000000
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALCS1200A: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0:    dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC1D0:    inputs:
snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0d:00.4/sound/card1/input11
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0d:00.4/sound/card1/input12
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0d:00.4/sound/card1/input13
input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:0d:00.4/sound/card1/input14
input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:0d:00.4/sound/card1/input15
input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:0d:00.4/sound/card1/input16
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0d:00.4/sound/card1/input17
usb 1-3.4.1: New USB device found, idVendor=0458, idProduct=6006, bcdDevice=50.02
usb 1-3.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3.4.1: Product: AUKEY PC-LM1E Camera
usb 1-3.4.1: Manufacturer: Vimicro corp.
usb 1-3.4.1: SerialNumber: AUKEY PC-LM1E Audio
[drm] amdgpu kernel modesetting enabled.
[drm] amdgpu version: 5.6.20.20.45
[drm] OS DRM version: 5.4.0
amdgpu: Ignoring ACPI CRAT on non-APU system
amdgpu: Virtual CRAT table created for CPU
amdgpu: Topology: Add CPU node
amdgpu 0000:0b:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xe0000000 -> 0xefffffff
amdgpu 0000:0b:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xf0000000 -> 0xf01fffff
amdgpu 0000:0b:00.0: remove_conflicting_pci_framebuffers: bar 5: 0xfcb00000 -> 0xfcb7ffff
checking generic (e0000000 300000) vs hw (e0000000 10000000)
fb0: switching to amdgpudrmfb from EFI VGA
Console: switching to colour dummy device 80x25
amdgpu 0000:0b:00.0: vgaarb: deactivate vga console
amdgpu 0000:0b:00.0: enabling device (0006 -> 0007)
[drm] initializing kernel modesetting (NAVI10 0x1002:0x731F 0x148C:0x2399 0xC4).
amdgpu 0000:0b:00.0: amdgpu: Trusted Memory Zone (TMZ) feature disabled as experimental (default)
amdgpu 0000:0b:00.0: amdgpu: set kernel compute queue number to 8 due to invalid parameter provided by user
[drm] register mmio base: 0xFCB00000
[drm] register mmio size: 524288
[drm] add ip block number 0 
[drm] add ip block number 1 
[drm] add ip block number 2 
[drm] add ip block number 3 
[drm] add ip block number 4 
[drm] add ip block number 5 
[drm] add ip block number 6 
[drm] add ip block number 7 
[drm] add ip block number 8 
[drm] add ip block number 9 
amdgpu 0000:0b:00.0: amdgpu: Fetched VBIOS from VFCT
amdgpu: ATOM BIOS: 111
[drm] VCN decode is enabled in VM mode
[drm] VCN encode is enabled in VM mode
[drm] JPEG decode is enabled in VM mode
[drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
amdgpu 0000:0b:00.0: amdgpu: VRAM: 8176M 0x0000008000000000 - 0x00000081FEFFFFFF (8176M used)
amdgpu 0000:0b:00.0: amdgpu: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF
[drm] Detected VRAM RAM=8176M, BAR=256M
[drm] RAM width 256bits GDDR6
[TTM] Zone  kernel: Available graphics memory: 8172492 KiB
[TTM] Zone   dma32: Available graphics memory: 2097152 KiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 8176M of VRAM memory ready
[drm] amdgpu: 15961M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] PCIE GART of 512M enabled (table at 0x0000008000300000).
[drm] Found VCN firmware Version ENC: 1.10 DEC: 5 VEP: 0 Revision: 13
[drm] PSP loading VCN firmware
usbcore: registered new interface driver snd-usb-audio
usb 1-3.4.2: new full-speed USB device number 8 using xhci_hcd
usb 1-3.4.2: New USB device found, idVendor=046d, idProduct=c083, bcdDevice= 8.01
usb 1-3.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3.4.2: Product: G403 Prodigy Gaming Mouse
usb 1-3.4.2: Manufacturer: Logitech
usb 1-3.4.2: SerialNumber: 049036683936
input: Logitech G403 Prodigy Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:06:00.1/usb1/1-3/1-3.4/1-3.4.2/1-3.4.2:1.0/0003:046D:C083.0008/input/input18
hid-generic 0003:046D:C083.0008: input,hidraw7: USB HID v1.11 Mouse [Logitech G403 Prodigy Gaming Mouse] on usb-0000:06:00.1-3.4.2/input0
input: Logitech G403 Prodigy Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:06:00.1/usb1/1-3/1-3.4/1-3.4.2/1-3.4.2:1.1/0003:046D:C083.0009/input/input19
[drm] reserve 0x900000 from 0x81fe400000 for PSP TMR
kvm: disabled by bios
MCE: In-kernel MCE decoding enabled.
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
audit: type=1400 audit(1609165162.483:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=743 comm="apparmor_parser"
audit: type=1400 audit(1609165162.483:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=754 comm="apparmor_parser"
audit: type=1400 audit(1609165162.483:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=754 comm="apparmor_parser"
audit: type=1400 audit(1609165162.483:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=754 comm="apparmor_parser"
audit: type=1400 audit(1609165162.483:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=751 comm="apparmor_parser"
audit: type=1400 audit(1609165162.483:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=742 comm="apparmor_parser"
audit: type=1400 audit(1609165162.483:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=752 comm="apparmor_parser"
audit: type=1400 audit(1609165162.483:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=752 comm="apparmor_parser"
audit: type=1400 audit(1609165162.487:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=746 comm="apparmor_parser"
audit: type=1400 audit(1609165162.487:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=750 comm="apparmor_parser"
input: Logitech G403 Prodigy Gaming Mouse Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:06:00.1/usb1/1-3/1-3.4/1-3.4.2/1-3.4.2:1.1/0003:046D:C083.0009/input/input20
input: Logitech G403 Prodigy Gaming Mouse System Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:06:00.1/usb1/1-3/1-3.4/1-3.4.2/1-3.4.2:1.1/0003:046D:C083.0009/input/input21
hid-generic 0003:046D:C083.0009: input,hiddev4,hidraw8: USB HID v1.11 Keyboard [Logitech G403 Prodigy Gaming Mouse] on usb-0000:06:00.1-3.4.2/input1
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
kvm: disabled by bios
amdgpu 0000:0b:00.0: amdgpu: RAS: optional ras ta ucode is not available
amdgpu 0000:0b:00.0: amdgpu: RAP: optional rap ta ucode is not available
amdgpu 0000:0b:00.0: amdgpu: smu driver if version = 0x00000036, smu fw if version = 0x00000037, smu fw version = 0x002a3d00 (42.61.0)
amdgpu 0000:0b:00.0: amdgpu: SMU driver if version not matched
amdgpu 0000:0b:00.0: amdgpu: use vbios provided pptable
amdgpu 0000:0b:00.0: amdgpu: smc_dpm_info table revision(format.content): 4.5
usb 1-3.4.3: new low-speed USB device number 9 using xhci_hcd
amdgpu 0000:0b:00.0: amdgpu: SMU is initialized successfully!
[drm] Display Core initialized with v3.2.99!
snd_hda_intel 0000:0b:00.1: bound 0000:0b:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
kvm: disabled by bios
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
kvm: disabled by bios
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] kiq ring mec 2 pipe 1 q 0
kvm: disabled by bios
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[drm] VCN decode and encode initialized successfully(under DPG Mode).
[drm] JPEG decode initialized successfully.
kfd kfd: amdgpu: Allocated 3969056 bytes on gart
amdgpu: Virtual CRAT table created for GPU
amdgpu: Topology: Add dGPU node [0x731f:0x1002]
kfd kfd: amdgpu: added device 1002:731f
amdgpu 0000:0b:00.0: amdgpu: SE 2, SH per SE 2, CU per SH 10, active_cu_number 36
[drm] fb mappable at 0xE04CA000
[drm] vram apper at 0xE0000000
[drm] size 14745600
[drm] fb depth is 24
[drm]    pitch is 10240
fbcon: amdgpudrmfb (fb0) is primary device
Console: switching to colour frame buffer device 160x45
amdgpu 0000:0b:00.0: fb0: amdgpudrmfb frame buffer device
amdgpu 0000:0b:00.0: amdgpu: ring gfx_0.0.0 uses VM inv eng 0 on hub 0
amdgpu 0000:0b:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0
amdgpu 0000:0b:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0
amdgpu 0000:0b:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0
amdgpu 0000:0b:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0
amdgpu 0000:0b:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0
amdgpu 0000:0b:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0
amdgpu 0000:0b:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0
amdgpu 0000:0b:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0
amdgpu 0000:0b:00.0: amdgpu: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
amdgpu 0000:0b:00.0: amdgpu: ring sdma0 uses VM inv eng 12 on hub 0
amdgpu 0000:0b:00.0: amdgpu: ring sdma1 uses VM inv eng 13 on hub 0
amdgpu 0000:0b:00.0: amdgpu: ring vcn_dec uses VM inv eng 0 on hub 1
amdgpu 0000:0b:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 1 on hub 1
amdgpu 0000:0b:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 4 on hub 1
amdgpu 0000:0b:00.0: amdgpu: ring jpeg_dec uses VM inv eng 5 on hub 1
[drm] Initialized amdgpu 3.40.0 20150101 for 0000:0b:00.0 on minor 0
usb 1-3.4.3: New USB device found, idVendor=04d9, idProduct=4545, bcdDevice= 1.05
usb 1-3.4.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-3.4.3: Product: USB Keyboard
kvm: disabled by bios
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
input: USB Keyboard as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:06:00.1/usb1/1-3/1-3.4/1-3.4.3/1-3.4.3:1.0/0003:04D9:4545.000A/input/input24
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
kvm: disabled by bios
hid-generic 0003:04D9:4545.000A: input,hidraw9: USB HID v1.10 Keyboard [USB Keyboard] on usb-0000:06:00.1-3.4.3/input0
input: USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:06:00.1/usb1/1-3/1-3.4/1-3.4.3/1-3.4.3:1.1/0003:04D9:4545.000B/input/input25
input: USB Keyboard System Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:06:00.1/usb1/1-3/1-3.4/1-3.4.3/1-3.4.3:1.1/0003:04D9:4545.000B/input/input26
hid-generic 0003:04D9:4545.000B: input,hidraw10: USB HID v1.10 Device [USB Keyboard] on usb-0000:06:00.1-3.4.3/input1
kvm: disabled by bios
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
videodev: Linux video capture interface: v2.00
kvm: disabled by bios
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
uvcvideo: Found UVC 1.00 device AUKEY PC-LM1E Camera (0458:6006)
input: AUKEY PC-LM1E Camera: AUKEY PC- as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:06:00.1/usb1/1-3/1-3.4/1-3.4.1/1-3.4.1:1.0/input/input27
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
kvm: disabled by bios
kvm: disabled by bios
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
igb 0000:05:00.0 enp5s0: igb: enp5s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready
kauditd_printk_skb: 20 callbacks suppressed
audit: type=1400 audit(1609165170.439:32): apparmor="DENIED" operation="capable" profile="/snap/snapd/10492/usr/lib/snapd/snap-confine" pid=1559 comm="snap-confine" capability=4  capname="fsetid"
------------[ cut here ]------------
WARNING: CPU: 4 PID: 1061 at drivers/gpu/drm/drm_vblank.c:637 drm_calc_vbltimestamp_from_scanoutpos+0x1cc/0x350 [drm]
Modules linked in: uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common input_leds videodev nls_iso8859_1 edac_mce_amd amdgpu(OE) snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_codec_hdmi snd_usb_audio snd_hda_intel amd_iommu_v2 snd_intel_dspcfg amd_sched(OE) kvm snd_hda_codec snd_usbmidi_lib snd_hda_core amdttm(OE) crct10dif_pclmul mc snd_hwdep ghash_clmulni_intel snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device snd_timer amdkcl(OE) drm_kms_helper aesni_intel snd fb_sys_fops crypto_simd syscopyarea cryptd sysfillrect glue_helper cdc_acm wmi_bmof sysimgblt k10temp joydev soundcore ccp mac_hid sch_fq_codel parport_pc ppdev lp parport drm ip_tables x_tables autofs4 hid_logitech ff_memless hid_generic usbhid hid crc32_pclmul i2c_piix4 igb ahci nvme libahci i2c_algo_bit nvme_core dca wmi
CPU: 4 PID: 1061 Comm: Xorg Tainted: G           OE     5.4.0-58-generic #64-Ubuntu
Hardware name: Gigabyte Technology Co., Ltd. X570 AORUS ELITE/X570 AORUS ELITE, BIOS F11 12/06/2019
RIP: 0010:drm_calc_vbltimestamp_from_scanoutpos+0x1cc/0x350 [drm]
Code: 43 20 8b 80 70 01 00 00 23 43 50 a8 10 75 1b 48 8b 83 28 03 00 00 48 85 c0 0f 84 7b fe ff ff 48 83 78 28 00 0f 84 70 fe ff ff  0b e9 6c fe ff ff 49 63 cb 4c 63 c0 44 89 da 45 89 fd 4d 69 c0
RSP: 0018:ffffb11800a5b6a0 EFLAGS: 00010002
RAX: 000000004000007b RBX: ffff911b7d200010 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffffc0589a98 RDI: 0000000000000001
RBP: ffffb11800a5b710 R08: 0000000000000000 R09: ffffffffc0c8d600
R10: ffffb11800a5b628 R11: ffffffffc0c8d610 R12: ffff911b7d200000
R13: 0000000000000000 R14: ffffb11800a5b734 R15: ffff911b83f8c080
FS:  00007f91c5e60a80(0000) GS:ffff911b8e900000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fab9c016288 CR3: 0000000402b98000 CR4: 0000000000340ee0
Call Trace:
 ? amdgpu_get_vblank_counter_kms+0x11b/0x170 [amdgpu]
 kcl_amdgpu_get_vblank_timestamp_kms+0xd/0x10 [amdgpu]
 drm_get_last_vbltimestamp+0x4e/0x80 [drm]
 drm_reset_vblank_timestamp+0x63/0xd0 [drm]
 drm_crtc_vblank_on+0x7f/0xe0 [drm]
 manage_dm_interrupts+0x3c/0x80 [amdgpu]
 amdgpu_dm_atomic_commit_tail+0xa1a/0x21e0 [amdgpu]
 commit_tail+0x99/0x110 [drm_kms_helper]
 drm_atomic_helper_commit+0x118/0x120 [drm_kms_helper]
 amdgpu_dm_atomic_commit+0x11/0x20 [amdgpu]
 drm_atomic_commit+0x4a/0x50 [drm]
 drm_atomic_helper_set_config+0x89/0xa0 [drm_kms_helper]
 drm_mode_setcrtc+0x1cd/0x7a0 [drm]
 ? drm_mode_getcrtc+0x190/0x190 [drm]
 drm_ioctl_kernel+0xae/0xf0 [drm]
 drm_ioctl+0x234/0x3d0 [drm]
 ? drm_mode_getcrtc+0x190/0x190 [drm]
 amdgpu_drm_ioctl+0x4e/0x80 [amdgpu]
 do_vfs_ioctl+0x407/0x670
 ? do_futex+0x10f/0x1e0
 ksys_ioctl+0x67/0x90
 __x64_sys_ioctl+0x1a/0x20
 do_syscall_64+0x57/0x190
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f91c61c050b
Code: 0f 1e fa 48 8b 05 85 39 0d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05  3d 01 f0 ff ff 73 01 c3 48 8b 0d 55 39 0d 00 f7 d8 64 89 01 48
RSP: 002b:00007ffc4882f608 EFLAGS: 00003246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007ffc4882f640 RCX: 00007f91c61c050b
RDX: 00007ffc4882f640 RSI: 00000000c06864a2 RDI: 000000000000000d
RBP: 00000000c06864a2 R08: 0000000000000000 R09: 000055a584e2e2d0
R10: 0000000000000000 R11: 0000000000003246 R12: 0000000000000000
R13: 000000000000000d R14: 000055a583f29810 R15: 000055a5840953a0
---[ end trace 19b2e93282b4a09d ]---

Return To AMD Radeon RX 5600 OEM System Information